Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Universal
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Isi Produk
1: Klem heavy-duty x 1
2: Perekat fleksibel (3M) x 2
3: Non-slip ring x 8
4: Hexagonal wrench x 1
5: 1/4” - 2 prong adapter x 2
6: Adaptor kamera 1/4 x 1
7: Thumbscrew x 3
8: Kunci klem x 1
[Spesifikasi]
Berat klem heavy duty: 272g
Ukuran klem heavy duty: 124x73x53mm (4.9x2.9x2 inci)
Berat perekat fleksibel: 40g
Ukuran perekat fleksibel: 66.5x66.5x48mm
1: Klem heavy-duty x 1
2: Perekat fleksibel (3M) x 2
3: Non-slip ring x 8
4: Hexagonal wrench x 1
5: 1/4” - 2 prong adapter x 2
6: Adaptor kamera 1/4 x 1
7: Thumbscrew x 3
8: Kunci klem x 1
[Spesifikasi]
Berat klem heavy duty: 272g
Ukuran klem heavy duty: 124x73x53mm (4.9x2.9x2 inci)
Berat perekat fleksibel: 40g
Ukuran perekat fleksibel: 66.5x66.5x48mm
[Deskripsi]
The all-new UniversalSpec. The Camera can be firmly fixed to a Handlebar or Bumper with a strong Clamp..
Flexible adhesive mount fits perfectly to helmet, fuel tank, and front glass, expanding your shooting angle options..
Flexible adhesive mount fits perfectly to helmet, fuel tank, and front glass, expanding your shooting angle options..
Peringatan
*To use the flexible adhesive mount, follow the instructions below.
Clean the base with a cleaning wipe before use. Make sure the surface is clean, dry and smooth.
Once the adhesive base is removed from the surface, it cannot be reused.
To ensure a strong hold, press and hold the product for 30 seconds after applying it to the surface.
Wait at least 24 hours after applying the product before using it.
If the 3-prong adapter is worn out, it is safer to install a non-slip ring.
This product cannot be used with a selfie stick.
*The heavy-duty clamps are designed for objects from 17mm to 37mm in diameter.
*When mounting the heavy-duty clamp mount to a smooth metal tube, it is recommended to use the wrench provided to tighten the clamp.
*When attaching the selfie stick to the heavy duty clamp mount, it is recommended to extend the Insta360 invisible action selfie stick up to 100cm.
*Connect the selfie stick only using the 1/4" thread on the heavy-duty clamp mount. Do not add the selfie stick after attaching other accessories.
*When mounting the camera directly on the heavy-duty clamp mount, the maximum speed must not exceed 80 km/h on flat roads and 40 km/h off-road. The selfie stick can only be attached to the bike when riding on flat roads. The mount must be tightened with the supplied wrench.
*Follow the instructions in the manual to install the flexible adhesive mount and the heavy-duty mount. Insta360 is not responsible for any damage or loss incurred if the setup does not match the instructions in the manual.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
Clean the base with a cleaning wipe before use. Make sure the surface is clean, dry and smooth.
Once the adhesive base is removed from the surface, it cannot be reused.
To ensure a strong hold, press and hold the product for 30 seconds after applying it to the surface.
Wait at least 24 hours after applying the product before using it.
If the 3-prong adapter is worn out, it is safer to install a non-slip ring.
This product cannot be used with a selfie stick.
*The heavy-duty clamps are designed for objects from 17mm to 37mm in diameter.
*When mounting the heavy-duty clamp mount to a smooth metal tube, it is recommended to use the wrench provided to tighten the clamp.
*When attaching the selfie stick to the heavy duty clamp mount, it is recommended to extend the Insta360 invisible action selfie stick up to 100cm.
*Connect the selfie stick only using the 1/4" thread on the heavy-duty clamp mount. Do not add the selfie stick after attaching other accessories.
*When mounting the camera directly on the heavy-duty clamp mount, the maximum speed must not exceed 80 km/h on flat roads and 40 km/h off-road. The selfie stick can only be attached to the bike when riding on flat roads. The mount must be tightened with the supplied wrench.
*Follow the instructions in the manual to install the flexible adhesive mount and the heavy-duty mount. Insta360 is not responsible for any damage or loss incurred if the setup does not match the instructions in the manual.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
Model yang Sesuai
Universal