Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Main unit]
・Rated voltage: DC12V
・Operating voltage range: DC7V-17V
・Current consumption: 0.9mA or less (in standby mode)
・Outer diameter dimension: W36 x H70 x D19mm
[Sirens]
・Model: Piezoelectric type
・Output sound pressure level: 122±5dB / 12V / 10cm
・Frequency: 2-4KHz
・Outer diameter dimension: W39.5 x H48 x D23.5mm
[Indicator light]
・Model: LED (Light Emitting Diode)
・Emission color: red
[Component parts]
・Main Unit x 1
・Siren x 1
・LED Indicator Lamp x 1
・Electro Tap x 2
・Instruction manual
・Rated voltage: DC12V
・Operating voltage range: DC7V-17V
・Current consumption: 0.9mA or less (in standby mode)
・Outer diameter dimension: W36 x H70 x D19mm
[Sirens]
・Model: Piezoelectric type
・Output sound pressure level: 122±5dB / 12V / 10cm
・Frequency: 2-4KHz
・Outer diameter dimension: W39.5 x H48 x D23.5mm
[Indicator light]
・Model: LED (Light Emitting Diode)
・Emission color: red
[Component parts]
・Main Unit x 1
・Siren x 1
・LED Indicator Lamp x 1
・Electro Tap x 2
・Instruction manual
[Deskripsi]
This is a special kit for a long-selling anti-theft alarm that is easy to use even for beginners.
No remote control required.The setting can be easily released by simply turning the ignition key ON and OFF.
The digital 3G sensor sounds a 122db alarm if the attitude changes by more than 7 degrees.
The special kit for each model comes with grounding instructions for sensors, sirens, and indicator LEDs, as well as wiring instructions, so you can easily install the kit without having to worry about the placement of each component, unlike universal kits.
The wiring of the sensor itself has been adjusted to the appropriate length for the model of vehicle, so it can be installed neatly without unnecessary long wiring getting in the way.
・The main body of the siren with 122db alarm sound is attached to the rear under the seat.
・An indicator light is affixed to the side of the ignition key to inform the alarm is in operation.
・The compact design of the high-performance compact 3G sensor allows it to be mounted on a bike with limited space.
■No remote control required!Set and release with your vehicle's key!
Simple operation by turning the key on and off.
You don't have to worry about carrying around the remote control or running out of batteries.
■High performance 3G sensor adopted!
The digital 3G sensor remembers the set state and reacts to suspicious movements.There are no false alarms!
The new version further reduces the false triggering caused by the vibration of the alarm set sound.
■Two-way warning / alarm system!
When the digital 3G sensor detects it, a warning tone will sound intermittently for 5 seconds.
In addition, if the digital 3G sensor continuously detects the alarm, it will generate a continuous alarm sound for up to 3 minutes.
■Re-memory function of digital 3G sensor
After the continuous alarm sound is stopped, the digital 3G sensor remembers the current status and keeps the alarm standby status, so when the sensor detects again, the warning sound and continuous alarm sound will be generated.
■LED indicator lamp included
You can check the standby status with the attached LED indicator lamp.
In addition, you can expect the effect of threatening and repelling by the flashing LED indicator lamp.
Conventional indicator lamps required drilling holes on the bike side, but the new version is attached with double-sided tape for easy installation.
■Remarkable power saving!
Current consumption in standby mode is only 0.9mA or less.
Power-saving type that is less than the self-discharge amount of the battery!
■No warning or alarm sounds for one minute after setting!
The warning / alarm sound does not sound for one minute after setting the alarm, so it is convenient to avoid false alarms when you put the seat cover on after setting the alarm.
■The compact design makes it easy to store in any location.
The compact design of the sensor body allows it to be stored in a small space.
■The Reality of Bike Theft!
In 2013, more than 51,588 motorcycles were stolen annually.
This means that a vehicle is stolen every 10 minutes.
And about 90% of the damage has gone unresolved.
The stolen vehicles range from large motorcycles to mopeds.
Do you think that your bike is fine because it is a small moped?
No remote control required.The setting can be easily released by simply turning the ignition key ON and OFF.
The digital 3G sensor sounds a 122db alarm if the attitude changes by more than 7 degrees.
The special kit for each model comes with grounding instructions for sensors, sirens, and indicator LEDs, as well as wiring instructions, so you can easily install the kit without having to worry about the placement of each component, unlike universal kits.
The wiring of the sensor itself has been adjusted to the appropriate length for the model of vehicle, so it can be installed neatly without unnecessary long wiring getting in the way.
・The main body of the siren with 122db alarm sound is attached to the rear under the seat.
・An indicator light is affixed to the side of the ignition key to inform the alarm is in operation.
・The compact design of the high-performance compact 3G sensor allows it to be mounted on a bike with limited space.
■No remote control required!Set and release with your vehicle's key!
Simple operation by turning the key on and off.
You don't have to worry about carrying around the remote control or running out of batteries.
■High performance 3G sensor adopted!
The digital 3G sensor remembers the set state and reacts to suspicious movements.There are no false alarms!
The new version further reduces the false triggering caused by the vibration of the alarm set sound.
■Two-way warning / alarm system!
When the digital 3G sensor detects it, a warning tone will sound intermittently for 5 seconds.
In addition, if the digital 3G sensor continuously detects the alarm, it will generate a continuous alarm sound for up to 3 minutes.
■Re-memory function of digital 3G sensor
After the continuous alarm sound is stopped, the digital 3G sensor remembers the current status and keeps the alarm standby status, so when the sensor detects again, the warning sound and continuous alarm sound will be generated.
■LED indicator lamp included
You can check the standby status with the attached LED indicator lamp.
In addition, you can expect the effect of threatening and repelling by the flashing LED indicator lamp.
Conventional indicator lamps required drilling holes on the bike side, but the new version is attached with double-sided tape for easy installation.
■Remarkable power saving!
Current consumption in standby mode is only 0.9mA or less.
Power-saving type that is less than the self-discharge amount of the battery!
■No warning or alarm sounds for one minute after setting!
The warning / alarm sound does not sound for one minute after setting the alarm, so it is convenient to avoid false alarms when you put the seat cover on after setting the alarm.
■The compact design makes it easy to store in any location.
The compact design of the sensor body allows it to be stored in a small space.
■The Reality of Bike Theft!
In 2013, more than 51,588 motorcycles were stolen annually.
This means that a vehicle is stolen every 10 minutes.
And about 90% of the damage has gone unresolved.
The stolen vehicles range from large motorcycles to mopeds.
Do you think that your bike is fine because it is a small moped?
Peringatan
*Please be sure to read the instruction manual before installation.
*Professional knowledge and experience are required to install this product.If you are not confident about the installation and wiring, it is recommended to rely on the experts for your safety.
*This product is for 12V motorcycles.This product cannot be installed on battery-less vehicles.
*It may not be able to be installed on some vehicles.
*This product does not completely prevent theft, but is an auxiliary device to prevent theft.PROTEC does not guarantee against theft or misuse.
*This product is not waterproof.Install the unit in a location where it will not be exposed to water.
*Install the main unit, siren and wiring in a place where they cannot be seen from the outside.
*This product cannot be installed on vehicles equipped with keyless entry.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Please note that Protec cannot be held responsible for any accidents or injuries that may occur if this product is modified.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*The indicator lamp will respond to the warning/alarm sound for one minute after it is set.
*There may be changes in product specifications due to the manufacturer's reasons.
*Professional knowledge and experience are required to install this product.If you are not confident about the installation and wiring, it is recommended to rely on the experts for your safety.
*This product is for 12V motorcycles.This product cannot be installed on battery-less vehicles.
*It may not be able to be installed on some vehicles.
*This product does not completely prevent theft, but is an auxiliary device to prevent theft.PROTEC does not guarantee against theft or misuse.
*This product is not waterproof.Install the unit in a location where it will not be exposed to water.
*Install the main unit, siren and wiring in a place where they cannot be seen from the outside.
*This product cannot be installed on vehicles equipped with keyless entry.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Please note that Protec cannot be held responsible for any accidents or injuries that may occur if this product is modified.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*The indicator lamp will respond to the warning/alarm sound for one minute after it is set.
*There may be changes in product specifications due to the manufacturer's reasons.