- Beranda
- Aksesoris
- Kelistrikan
- Dudukan / Holder Smartphone
- RAM MOUNT
- RAM MOUNT: Torque(TM) Rail Base (Besar)
Torque(TM) Rail Base (Besar)
- Nomor produk: RAM-B-408-112-15U
-
- IN STOCK
- Out Stock
- RAM MOUNT
- |
- 4.0
- (2 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna : Hitam
Bahan : Aluminium Powder Coating
Ukuran Bola : 1 inci
Diameter Dasar Pemasangan Bar : Φ28,5-Φ38mm
Termasuk alat pemasangan (Kunci Hexagonal 4mm)
[Spesifikasi]
pengolahan : Tanpa Type: Bar Mount Base
Color: Black
Size: 1 inch ball
Weight [grams]: 136g
Material [Material]: Marine-grade aluminum
Compatibility: Mounting point diameter Φ28.5-38.1mm
Where Used: Handlebar (tapered bars)
Quantity: 1 pc.
Components: #10-24 x 1inch cap bolt, #10-24 Nylock nut 1.12inch spacer, 1.27inch spacer, 5/32inch hex wrench, 127mm x 17mm rubber strip
Bahan : Aluminium Powder Coating
Ukuran Bola : 1 inci
Diameter Dasar Pemasangan Bar : Φ28,5-Φ38mm
Termasuk alat pemasangan (Kunci Hexagonal 4mm)
[Spesifikasi]
pengolahan : Tanpa Type: Bar Mount Base
Color: Black
Size: 1 inch ball
Weight [grams]: 136g
Material [Material]: Marine-grade aluminum
Compatibility: Mounting point diameter Φ28.5-38.1mm
Where Used: Handlebar (tapered bars)
Quantity: 1 pc.
Components: #10-24 x 1inch cap bolt, #10-24 Nylock nut 1.12inch spacer, 1.27inch spacer, 5/32inch hex wrench, 127mm x 17mm rubber strip
[Deskripsi]
Millibar dan Inch bar, untuk keduanya.
Dasar untuk Taper Bar dan Fat Bar (Setara 38mm) Pusat berdiameter besar. Products: Bar mount base Compatible diameters Φ28.58-Φ38.1.
For installation, a clearance of at least 10mm is required on the lower side of the clamp.
This is a base part only.
(Please prepare the arm and mount separately.
)
Dasar untuk Taper Bar dan Fat Bar (Setara 38mm) Pusat berdiameter besar. Products: Bar mount base Compatible diameters Φ28.58-Φ38.1.
For installation, a clearance of at least 10mm is required on the lower side of the clamp.
This is a base part only.
(Please prepare the arm and mount separately.
)
Peringatan
* Harap jangan mengoperasikan objek pemasangan atau produk dudukan ram saat bersepeda. Ada kemungkinan terjadinya kerusakan pada produk elektronik seperti smartphone, sistem navigasi, dll karena adanya getaran saat dipasang pada sepeda motor. (Silakan gunakan dengan risiko Anda sendiri.)
* Ini adalah item tunggal bagian dasar. Harap persiapkan lengan dan pasang secara terpisah.
* Diperlukan jarak bebas minimal 10 mm di sisi bawah penjepit untuk pemasangan.
* Ada perbedaan individu dalam cat dan pelapis, dan kualitas setiap produk unik. *At least 10mm clearance is required at the bottom side of the clamp for installation.
*This is a base part only.(Please prepare the arm and mount separately.)
*Do not operate or adjust the mounting object or the ram mount product while riding, as it is dangerous.
*We will not compensate for any damage caused by vibration or removal of the product during or after installation, or for any trouble caused by installation method or combination of parts without any defect in the Ram Mount product.
*In order to prevent unexpected breakage of parts, malfunctions, or accidental damage caused by deterioration of materials (including rust) due to use environment, aging, or wear and tear, always inspect the product before use and discontinue use or replace the product with a new one if any abnormality is found.
*There may be changes in product specifications due to the manufacturer's reasons.
* Ini adalah item tunggal bagian dasar. Harap persiapkan lengan dan pasang secara terpisah.
* Diperlukan jarak bebas minimal 10 mm di sisi bawah penjepit untuk pemasangan.
* Ada perbedaan individu dalam cat dan pelapis, dan kualitas setiap produk unik. *At least 10mm clearance is required at the bottom side of the clamp for installation.
*This is a base part only.(Please prepare the arm and mount separately.)
*Do not operate or adjust the mounting object or the ram mount product while riding, as it is dangerous.
*We will not compensate for any damage caused by vibration or removal of the product during or after installation, or for any trouble caused by installation method or combination of parts without any defect in the Ram Mount product.
*In order to prevent unexpected breakage of parts, malfunctions, or accidental damage caused by deterioration of materials (including rust) due to use environment, aging, or wear and tear, always inspect the product before use and discontinue use or replace the product with a new one if any abnormality is found.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/