- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Swingarm
- GM-MOTO
- GM-MOTO: Swingarm Lebar Full Set dengan Velg 8 Inci 5.5 J untuk MONKEY
Swingarm Lebar Full Set dengan Velg 8 Inci 5.5 J untuk MONKEY
- Nomor produk: gm-00006-8
-
- IN STOCK
- Out Stock
- GM-MOTO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: Aluminium CNC presisi tinggi
Lebar swingarm: Spesifikasi ultra lebar, lebar 220mm
Roda: 8 inci 5.5J roda lebar
Rem: Kaliper 8 inci
[Termasuk]
Hub lebar khusus, set rem belakang, sambungan shock lebar, kit offset gir depan, dll. Material: High Precision Aluminum Cut-out
Swing Arm Wide Width: 220mm Width Wide Specification
Wheel: 8-inches 5.5J Wide Wheel
Brake: 8-inches Corresponding Caliper
[Product Contents]
Exclusive Wide hub, Rear brake kit, Wide Suspension receiving, Front sprocket Offset Kit etc.
Lebar swingarm: Spesifikasi ultra lebar, lebar 220mm
Roda: 8 inci 5.5J roda lebar
Rem: Kaliper 8 inci
[Termasuk]
Hub lebar khusus, set rem belakang, sambungan shock lebar, kit offset gir depan, dll. Material: High Precision Aluminum Cut-out
Swing Arm Wide Width: 220mm Width Wide Specification
Wheel: 8-inches 5.5J Wide Wheel
Brake: 8-inches Corresponding Caliper
[Product Contents]
Exclusive Wide hub, Rear brake kit, Wide Suspension receiving, Front sprocket Offset Kit etc.
[Deskripsi]
"Roda lebar 5,5J 8 inci" yang sangat diperlukan untuk kit lengkap lengan ayun lebar yang populer. Tentu saja, produksinya adalah produk aluminium mesin presisi tinggi oleh KEPSPEED.
swingarm Lebar lebar adalah spesifikasi ultra lebar 220 mm lebar yang 2,5 cm lebar di kedua sisi. Kami akan menerimanya dan merilisnya sebagai kit lengkap bersama dengan kit offset sproket drive.
Kami juga menjual setiap unit, tetapi jika Anda membelinya sebagai unit lengkap, Anda tidak perlu khawatir tentang memilih suku cadang. The 8 inch 5.5J wide wheels are an essential part of the popular Wide Swingarm Complete Kit.Of course, it is made by KEPSPEED, a high precision machined aluminum product.
The swingarm width is 220mm wider (2.5cm wider on both sides).
It is also released as a complete kit with wide hub, wide suspension and drive sprocket offset kit.
GM-MOTO can sell each unit individually, but if you buy a complete unit, you don't have to worry about the selection of parts.
swingarm Lebar lebar adalah spesifikasi ultra lebar 220 mm lebar yang 2,5 cm lebar di kedua sisi. Kami akan menerimanya dan merilisnya sebagai kit lengkap bersama dengan kit offset sproket drive.
Kami juga menjual setiap unit, tetapi jika Anda membelinya sebagai unit lengkap, Anda tidak perlu khawatir tentang memilih suku cadang. The 8 inch 5.5J wide wheels are an essential part of the popular Wide Swingarm Complete Kit.Of course, it is made by KEPSPEED, a high precision machined aluminum product.
The swingarm width is 220mm wider (2.5cm wider on both sides).
It is also released as a complete kit with wide hub, wide suspension and drive sprocket offset kit.
GM-MOTO can sell each unit individually, but if you buy a complete unit, you don't have to worry about the selection of parts.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Pemasangan ke Monkey FI memerlukan modifikasi karena bentuk cover generator berbeda.
*Produk swingarm KEPSPEED dibuat menggunakan bahan aluminium berkualitas tinggi.
*Ada kasus di mana warna produk OEM kosong. Maka dari itu akan ada perubahan warna tergantung dengan lot produksi.
*Harap diperhatikan bahwa bentuk bracket kaliper dapat berbeda karena perubahan spek.
*Tidak termasuk bracket master silinder belakang. Harap siapkan secara terpisah.
[Pemasangan]
Memerlukan gir depan offset untuk menyesuaikan modifikasi pada bagian cover generator.
*Produk sesuai dengan mesin buatan Jepang dan LONCIN, namun mesin buatan Cina lainnya seperti LIFAN 150cc tidak dapat digunakan.
*Gunakan ukuran gir depan dan belakang untuk ukuran 420.
*Manual pemasangan sudah termasuk. Pasang dengan mekanik atau di bengkel.
*Cek kesesuaian shock belakang.
*Harap gunakan washer tambahan jika jarak antara rangka dan swingarm sebesar 0.5mm atau lebih di tiap sisinya.
*Ada kasus di mana ketika pivot shaft dikencangkan lalu ditimpa beban berat, produk swingarm rusak.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
※ There is a case that it becomes out of stock according to the color.The color of the product may slightly change due to differences in production lots, but this is not covered by the manufacturer's warranty.
*The shape of the caliper support is subject to change due to specification changes.
*The kit includes almost all parts for widening the rear swingarm, but the bracket for fixing the rear brake master cylinder is not included in the kit. Please prepare separately.
*This kit is for use with tube tires.Tires and tubes are sold separately.
[About the installation]
*The drive sprocket offset kit requires the sprocket portion of the generator cover to be machined off.
*Although this product is compatible with Japanese engines and Rongshin engines, some Chinese engines such as Lihuan 150cc may not be able to support 4 points.
※ Please use the 420 size sprockets for MONKEY.
※ Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.Experienced motorcycle mechanics are required to perform the assembly work.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※ GM-MOTO does not accept returns for any reason after the product has been installed.
*There may be changes in product specifications due to the manufacturer's reasons.
*Produk swingarm KEPSPEED dibuat menggunakan bahan aluminium berkualitas tinggi.
*Ada kasus di mana warna produk OEM kosong. Maka dari itu akan ada perubahan warna tergantung dengan lot produksi.
*Harap diperhatikan bahwa bentuk bracket kaliper dapat berbeda karena perubahan spek.
*Tidak termasuk bracket master silinder belakang. Harap siapkan secara terpisah.
[Pemasangan]
Memerlukan gir depan offset untuk menyesuaikan modifikasi pada bagian cover generator.
*Produk sesuai dengan mesin buatan Jepang dan LONCIN, namun mesin buatan Cina lainnya seperti LIFAN 150cc tidak dapat digunakan.
*Gunakan ukuran gir depan dan belakang untuk ukuran 420.
*Manual pemasangan sudah termasuk. Pasang dengan mekanik atau di bengkel.
*Cek kesesuaian shock belakang.
*Harap gunakan washer tambahan jika jarak antara rangka dan swingarm sebesar 0.5mm atau lebih di tiap sisinya.
*Ada kasus di mana ketika pivot shaft dikencangkan lalu ditimpa beban berat, produk swingarm rusak.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
※ There is a case that it becomes out of stock according to the color.The color of the product may slightly change due to differences in production lots, but this is not covered by the manufacturer's warranty.
*The shape of the caliper support is subject to change due to specification changes.
*The kit includes almost all parts for widening the rear swingarm, but the bracket for fixing the rear brake master cylinder is not included in the kit. Please prepare separately.
*This kit is for use with tube tires.Tires and tubes are sold separately.
[About the installation]
*The drive sprocket offset kit requires the sprocket portion of the generator cover to be machined off.
*Although this product is compatible with Japanese engines and Rongshin engines, some Chinese engines such as Lihuan 150cc may not be able to support 4 points.
※ Please use the 420 size sprockets for MONKEY.
※ Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.Experienced motorcycle mechanics are required to perform the assembly work.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※ GM-MOTO does not accept returns for any reason after the product has been installed.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/