- Beranda
- Sparepart Motor
- Rem
- Piringan Rem Cakram
- PerformanceMachine
- PerformanceMachine: Piringan Rem 11,5 inch HEATHEN
Piringan Rem 11,5 inch HEATHEN
- Nomor produk: PER-0133-1522HEAS
-
- IN STOCK
- Out Stock
- PerformanceMachine
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Ukuran Disk : 11,5 inci
DEPAN YANG TEPAT Disc Size: 11.5"
Right front
DEPAN YANG TEPAT Disc Size: 11.5"
Right front
Catatan
Yoshimura-MJN / Ini adalah adaptor untuk memasang filter ke karburator TMRDengan adaptor tipe pertukaran corong konvensional, karena jet udara pilot berada di sisi bawah lubang utama, tidak mungkin untuk melewatkan udara yang melewati filterUntuk alasan itu ada kekhawatiran pilot air jet dll. Adaptor filter TMR Yoshimura memiliki jalur jet udara pilot di bagian bawah sehingga sistem utama / Kami menutupi kedua sistem pilot Dengan menutupi, mencegah debu dan sistem utama / Setiap sistem pilot dapat menghirup udara resistansi yang sama Daftar Bagian
Other types are here.
Peringatan
* Foto produk hanya untuk gambar. Silakan gunakan sebagai referensi.
* Berisi spesifikasi lain di foto.
* Harap dicatat bahwa disk PM tidak dapat digunakan untuk roda OEM. Itu karena garis besar lubang penghitung di sisi belakang cakram PM sedikit lebih kecil daripada bentuk luar hub roda OEM.. Pemasangan dapat dilakukan dengan menyebarkan lubang penghitung atau memotong hub. *Images are for reference only.
*Other specifications are included in the image.
*PM discs are generally not compatible with stock wheels.This is because the outline of the seat on the back side of the PM disc is slightly smaller than that of the stock wheel hub.It is possible to install them by widening the seating area or cutting the hub.
* Berisi spesifikasi lain di foto.
* Harap dicatat bahwa disk PM tidak dapat digunakan untuk roda OEM. Itu karena garis besar lubang penghitung di sisi belakang cakram PM sedikit lebih kecil daripada bentuk luar hub roda OEM.. Pemasangan dapat dilakukan dengan menyebarkan lubang penghitung atau memotong hub. *Images are for reference only.
*Other specifications are included in the image.
*PM discs are generally not compatible with stock wheels.This is because the outline of the seat on the back side of the PM disc is slightly smaller than that of the stock wheel hub.It is possible to install them by widening the seating area or cutting the hub.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/