- Beranda
- Perkakas
- Peralatan Kabel Listrik
- Tang Potong Kabel
- amon
- amon: Crimper for Thin Wire
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
untuk Garis Tipis (0,3sq atau kurang)
[Ukuran]
Panjang Keseluruhan Sekitar 160mm
[Bahan]
Body / S50CCarbon Steel, Grip / Soft Vinyl Chloride Only for fine wire (0.3sq or less)
[Size]
Total length approx. 160mm
[Material]
Body / S50C carbon steel, Grip / soft vinyl chloride
[Ukuran]
Panjang Keseluruhan Sekitar 160mm
[Bahan]
Body / S50CCarbon Steel, Grip / Soft Vinyl Chloride Only for fine wire (0.3sq or less)
[Size]
Total length approx. 160mm
[Material]
Body / S50C carbon steel, Grip / soft vinyl chloride
[Deskripsi]
Perlunya pekerjaan garis halus!
Mampu menghilangkan lapisan, mengeriting terminal dan memotong kabelnya.
Tang listrik dikembangkan untuk seri kawat halus AMON
[Cara Crimp Terminal]
Terminalnya kecil, jadi bekerjalah dengan hati-hati ..
1. Hapus sekitar 5mm lapisan dan lipat kembali kabel inti ..
2. Lewatkan kabel melalui terminal dan derek kabel inti di bagian INS, dan tekuk bagian AWG28-22 dengan kencang.
3. Selanjutnya, sisi yang dilapisi dikerutkan di bagian INS ..
4. Masukkan terminal ke skrup sampai terkunci. ●A must-have for fine wire work!
●Capable of coating removal, terminal clamping, and cord cutting
●Electric pliers developed for the Aemon Fine Wire Series
[terminal clamping procedure]
Please work carefully because the terminal is small.
1. Remove about 5mm of the coating and fold back the core wire.
2. Pass the cord through the terminal, tighten the core wire with the INS part, and tighten it securely with the AWG28-22 part.
3. Next, tighten the coating side at the INS part.
4. Insert the terminal into the coupler until it locks into place.
Mampu menghilangkan lapisan, mengeriting terminal dan memotong kabelnya.
Tang listrik dikembangkan untuk seri kawat halus AMON
[Cara Crimp Terminal]
Terminalnya kecil, jadi bekerjalah dengan hati-hati ..
1. Hapus sekitar 5mm lapisan dan lipat kembali kabel inti ..
2. Lewatkan kabel melalui terminal dan derek kabel inti di bagian INS, dan tekuk bagian AWG28-22 dengan kencang.
3. Selanjutnya, sisi yang dilapisi dikerutkan di bagian INS ..
4. Masukkan terminal ke skrup sampai terkunci. ●A must-have for fine wire work!
●Capable of coating removal, terminal clamping, and cord cutting
●Electric pliers developed for the Aemon Fine Wire Series
[terminal clamping procedure]
Please work carefully because the terminal is small.
1. Remove about 5mm of the coating and fold back the core wire.
2. Pass the cord through the terminal, tighten the core wire with the INS part, and tighten it securely with the AWG28-22 part.
3. Next, tighten the coating side at the INS part.
4. Insert the terminal into the coupler until it locks into place.
Peringatan
* Harap pastikan untuk membaca peringatan di bagian belakang paket sebelum menggunakan. *
*Before use, please read the instructions on the back of the package.*
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/